| |
|
| |
EC-90
POWER CABLES
Due
to the additional features of the EC-90 series, many of
the power cables are specific to the new design and are
not intechangeable with older batteries. 12 volt cables
wired pin 1 GND, pin 4 HOT are the exception. For more
detailed information, please see the notes below and refer
to the EC-90 owners manual. |
|
6
VOLT XLR POWER CABLE
#X-J6V
$30.00
|
|
12 VOLT
XLR POWER CABLE
#X-12V
$30.00 |
 |
Apogee
MINI-ME
12 VOLT
#210-12V
$28.00 |
|
Apogee
MINI-ME
6 VOLT
#210-J6V
$28.00
|
|
LunaTEC
V3
6 VOLT
#WA300
$30.00 |
| |
LunaTEC
V3
12 VOLT
#WA302
$30.00
|
| |
Sound
Devices
6 VOLT
#WA500
$30.00
|
 |
Sony
TCD-D7, TCD-D8, SBM-M1
6 VOLT
#240-J6V
$28.00 |
|
E.A.A.
mic preamp
6 VOLT
#210-J6V
$28.00 |
| |
Tascam
DA-P1 DAT
6 or 7.5 VOLT
#JP1
$45.00 |
| |
NOTES:
To
avoid compatibility problems, the EC-90 XLR output connectors
are configured differently for each voltage. The 12
volt output is configured as industry standard pin 1
ground, pin 4 positive. All existing Eco-Charge 12 volt
cables are compatible with the EC-90. The regulated
output connector is configured differently to prevent
voltage mismatching and potential equipment damage.
This new wiring configuration requires a jumper in the
power cable XLR connector to activate the regulator
circuit. Therefore, previous 6 volt cables are not compatible
with the EC-90 regulated output. We can modify your
old cable if you do not wish to purchase a new power
cable. Cables with a "J" in the part number are required
for the new wiring configuration. See the EC-90 manual
for more information.
|
